




Véhicules municipaux et routiers
Véhicules municipaux et routiers (L3000 9m 5180GLQS6)
Modèle 5180GLQS6
Configuration documentée: Véhicules municipaux et routiers. Examinez la configuration documentée et les caractéristiques qui influencent l'achat avant de demander un devis. L'équipement final, la certification et les conditions de livraison sont confirmés pour chaque commande.
Charge utile nominale8685 kgDimensions hors tout7930 × 2550 × 3460 mmMasse totale du véhicule18000 kg
Discuter de cette configuration →L'équipement final, la certification et les conditions de livraison sont confirmés pour chaque commande.
Spécifications techniques
Spécifications techniques
Comparez les données documentées sur l'équipement, les dimensions, le châssis et la motorisation. L'homologation du marché de destination doit être confirmée séparément.
| Charge utile nominale | 8685 kg |
|---|---|
| Dimensions hors tout | 7930 × 2550 × 3460 mm |
| Masse totale du véhicule | 18000 kg |
| Poids à vide | 9120 kg |
| Modèle de châssis | SX1189LA1F1C |
| Empattement | 4000 mm |
| Modèle du moteur | B6.2NS6B230 |
| Cylindrée | 6200 ml |
| Puissance moteur | 169 kW |
| Puissance en chevaux | 229 hp |
| Pneus | 295/80R22.5 18PR |
| Remarques particulières | This vehicle is mainly used for road asphalt spreading. The upfit includes a tank and asphalt spraying device for liquid asphalt with a density of 900 kg/m³. The side protection is bolted Q235B; the rear protection is replaced by the working device, with its lower edge 280 mm above the ground. The vehicle is equipped with ABS and an 80 km/h speed limiter. The cab is selected with the chassis. Rear work lights are for stationary operation only. The tank insulation layer is 270 mm thick. |
| Superstructure | Asphalt tank capacity 9.7m³, insulation layer is 50mm rock wool covered with stainless steel; Equipped with Zhejiang Shanggui QGB950 asphalt pump (950L/min), RY40-25-160 heat conduction oil pump, HM05-90-BD40 asphalt pump motor, EFRD-G03-160-3-6-31 proportional valve; Adopt Riello burner G20 + full heating of heat conduction oil, 36 one-control-one intelligent nozzles at the rear, touch screen computer control in the cab; Asphalt spraying amount 0.25-3L/㎡, spraying width ≤4.5m, supports pneumatic/diesel cleaning, can spray emulsified asphalt, hot asphalt, modified asphalt. |
Discuter de votre besoin →


